Table of Contents
Advertisement
Cleaning the drain
pump
Drain the water
WM08G260IN
WM08G268IN
31
This is necessary if the washing solution has not been
completely drained. The pump is blocked by either
loose debris or fluff which accumulates if fluff-giving
fabrics are washed.
(Up to 20 litres. Have a suitable container ready.)
m
Risk of scalding!
Allow the hot water to cool down beforehand.
Keep children and pets away.
Turn the programme selector to Off.
■
Open service flap.
■
Carefully unscrew the pump cap - do not remove it
■
completely - and let the water drain out into a
shallow container (let the remainder drip onto a
floor cloth). Repeat the operation until there is no
water left in the machine.
Remove the pump cap.
■
Remove foreign objects/fluff from inside and clean
■
the interior. The pump impeller wheel must be able
to rotate. Clean any residual lye or fluff from the
thread of the pump cover and pump housing.
Insert the pump cap and screw tight.
■
Insert and close the service flap.
■
To prevent unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber II.
■
Select the "Only Spin Í" programme.
■
Advertisement
Table of Contents
