Siemens WM08G260IN Operating And Installation Instructions page 21

Start in time
21
Before a programme starts, you can specify by how
many hours the start of the programme is to be
delayed.
Turn the programme selector to desired programme.
"'" control light flashes. LED dsplay shows the
remaining time
Press the "5" button. The LED shows "
■
( =hour).
Press the "5" button again to select the desired
■
start in time.
² The start in time can be set in 1-hour steps. The
maximum start in time can be set to 24 hours. If a
start in time of 24h has been set, the "
accessed by pressing the "5" button again.
² The start in time start working after pressing the "P"
Start/Pause button. The cursor between number
and flashes until the start in time elapses and the
programme starts.
² The start in time is counted down by hour. When the
start in time has elapsed, the programme starts
automatically and the remaining time is displayed.
² The start in time can be changed at any time before
the programme starts.Press the "5" button until the
required time appears.The selected programme will
not be changed.
² If the programme was changed, the start in time was
terminated also. The LED will displays remaining
time. If required, reset the start in time.
² You can add/remove laundry during the period of
start in time works. Close the loading door
immediatelly after finishing loading/removing.
"
" can be