Table of Contents
Advertisement
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Touchpad
Removing the touchpad
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
3-cell battery
About this task
The following images indicate the location of the touchpad and provide a visual representation of the removal procedure.
Steps
1. Remove the four (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
or
4-cell battery
(whichever applicable).
After working inside your
Before working inside your
or
4-cell battery
(whichever applicable).
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
69
Advertisement
Table of Contents
