Advertisement

Quick Links

Transmitter

LED status indicator
Team teaching (T21 only)
Synchronize receiver /
Enter
Charging jack

Receiver

The toggle beneath the switch,
available on the R2 receiver is for
older students who may want to
toggle between a number of
different frequencies.

The Amigo System

On/ off/ mute
The Receiver's LED can confirm the following:
• The battery is okay.
• The receiver is on.
• The transmitter and receiver are working
together.
• The child is on the right channel.
Mode Switch
○○
FM and environmental microphone operating
○ FM only operating
● Off
Microphone jack
LCD display
Clear
Audio input jack
Pin orientation. The LED should point to the
front or back on a bte processor. It is
possible to change the orientation of the pins
by pulling out the plate with the pins on
(there are recesses for finger nails!), turning
the pins and pushing the plate back in.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Amigo and is the answer not in the manual?

Questions and answers

Summary of Contents for oticon Amigo

  • Page 1 The Amigo System Transmitter LED status indicator On/ off/ mute Microphone jack Team teaching (T21 only) LCD display Clear Synchronize receiver / Enter Charging jack Audio input jack Receiver The receiver’s LED can confirm the following: • The battery is okay.
  • Page 2 This needs to be done using the channel wizard menu. Details of how to do this can be found in the Amigo Fitting Guide which is available on line on the Amigo website (www.amigofm.com).
  • Page 3 To find information on how to use these features go to: http://www.amigofm.com/eprise/main/Oticon/com/SEC_Professionals /ProductInformation/SEC_Amigo/Professionals/Downloads/_index and download the Amigo fitting guide which gives full details on how to use the system. Assigning a name to the transmitter and receiver Adjusting the FM gain on the receiver...

Table of Contents