oticon ConnectLine TV Adaptor Quick Manual

Power Outlet
Box 1
TV Adaptor
Power Cord
TV Cord
Box 2
TV cord
S Streamer & Pairing
Streamer
NOTE:
Before
pairing, charge
Streamer or
attach to power
supply.
STEP 1:
Plug the
power adaptor into
the power source.
STEP 1:
Locate
audio output jacks
on back of TV
(typically labelled
Audio Out).
Pairing
button
STEP 1:
Place
Streamer close
to adaptor. Press
pairing button until
blue light fl ashes
rapidly.
Box 3
Alternative Connections:
Use the Audio Jack Adaptor or Microphone (Box
3) if the audio output jack is not available. See
enclosed bookletf or installation instructions.
ConnectLine ™ TV Adaptor Quick Guide
for Output Jack Setup
For more detailed instructions
please see the Installation Guide
enclosed with your system.
STEP 2: STEP 3:
Plug the
power cord into will be green when
the power adaptor power is on.
marked A.
STEP 2: STEP 3:
Plug the
TV cord into the
output jacks as
shown.
STEP 2: STEP 3:
Pairing
is complete when adaptor can be
orange status light mounted to the
on TV adaptor TV with the Velcro
comes on (about 1-2 provided.
minutes).
Audio
Headphone Jack
The light
Plug TV cord into adaptor marked B.
The TV
TV Microphone