Incorrect Measurement; Cleaning & Maintenance - inventum PW810W Instruction Manual

10

incorrect measurement

If the scale detects an error during measurement, this is indicated with Err.
Possible causes of errors
The electrical resistance between the electrodes
and the soles of your feet is too high (e.g. with heavily
callused skin).
The fat percentage is outside the measurable range
(less than 5% or greater than 50%).
The water percentage is outside the measurable range
(less than 10% or greater than 80%).
The muscle and bone percentages are outside the
measurable range - age and gender related (less than
10% or greater than 80%).
The maximum load-bearing capacity of 180 kg (397 lb)
was exceeded [Err].
You are not standing correctly on the scale [Err2].
11
cleaning & maintenance
The scale should be cleaned occasionally. Dirt and dust has a tendency to collect on the rubber electrodes. Always stand on
the scale barefoot or wearing socks as the rubber surfaces will quickly become dirty if you wear shoes. Use a damp cloth to
clean the scale. Do not use abrasive detergents and never immerse the scale in water.
• Do not use aggressive solvents or cleaning agents!
• Never immerse the scale in water or any other liquids.
• Handle the scale with care, protect the scale from impact with hard object and do not drop it.
Your scale is fitted with a change battery indicator. If the scale is operating with batteries which are too weak, Lo appears
on the display and the scale will switch off automatically. In this case, the batteries must be exchanged (3 x AAA, 1,5V). If
necessary please use a small screwdriver to remove the batteries. Check the polarities of the batteries before placing.
Always use new batteries.
Batteries can contain toxins that are harmful to health and the environment. The used, completely drained standard and
rechargeable batteries must be disposed of in specially marked collection containers, at toxic waste collection points or
electrical product retailers. You are legally obligated to dispose of the batteries.
Note: Batteries containing pollutants are marked with the following symbols: Pb = Battery contains lead, Cd = Battery
contains cadmium, Hg = Battery containers mercury.
22
• English
Causes of error
Repeat weighing barefoot. Slightly moisten the soles of your
feet if necessary. Remove the calluses on the soles of your feet
if necessary.
Repeat weighing barefoot. Slightly moisten the soles of your
feet if necessary.
Repeat weighing barefoot. Slightly moisten the soles of your
feet if necessary.
Repeat weighing barefoot. Slightly moisten the soles of your
feet if necessary.
Only weigh the maximum permissible weight.
Make sure your feet are placed on the measuring strips.