Car and Driver ZX-1222 User Manual page 5

Connect The Road Patrol Touch Duo To Your Car With The
Power Cable
Take the cigarette plug end of the Power Cable {15} and plug it into your
car's cigarette outlet (Fig. 4). Take the other end of the power cable and
plug it into the Road Patrol Touch Duo (Fig. 5). Make sure the cable is
secured along the edge of the windshield and the headliner using the
Adhesive Cable Clips {14}. As long as the car is powered On/Off the
Road patrol Touch Duo will power On/Off as well.
Fig. 4
Option 1: Set-Up: Using Suction Cup
Remove The Rear Camera from The Road Patrol Touch Duo
Separate the Rear Camera {2} from the main body of the Road Patrol
Touch Duo (Fig. 6).
Note: Be sure not to pull the Road Patrol Touch Duo from your windshield
if you have previously mounted it.
Set-Up Rear Cam
Fig. 5
Fig. 6
4