Car and Driver ZX-1222 User Manual page 10

Powering On The Road Patrol Touch Duo
When the Road Patrol Touch Duo is connected to a car that it is powered
On then the Road Patrol Touch Duo will power on as well. See "Connect
The Road Patrol Touch Duo To Your Car With The Power Cable" on
page 4.
A red charging indicator will begin flashing on the screen demonstrating
that recording has begun.
Note: The user may also manually power On/Off the Road Patrol Touch
Duo by pressing and holding the "Power" button for three seconds.
Note:
Format the Micro SD card before you start recording for the first time.

Be sure that the Micro SD card has been inserted properly before

powering up the device.
Power Off
Option 1: When the car's engine is turned off, the device will
automatically turn off shortly after.
Option 2: To manually power off the device press and hold the power
button (4) for at least three seconds. Do not eject the SD card during this
process as it may cause damage to the last recorded file.
Note: It will remain on just long enough to save the current recording.
9