Philips 170W4P User Manual page 55

Connecting to Your PC
3) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
file:///D|/K1/english/170w4p/install/connect.htm (3 of 4) [3/26/2003 10:53:18 AM]
Note: If you use an Apple
TM
Macintosh , you need to
connect the special Mac
adapter to one end of the
monitor signal cable.