MA dot2 User Manual

dot2 User Manual – Commands
Version 1.1 – 2022-11-28
English

OutFade Command

This page describes the syntax and how to use the OutFade command.
To go to the OutFade command it is necessary to press another function key before, e.g.
(= OutFade).

Description

With the OutFade command, you can indicate out fade times
for a new cue with out fade time
in a existing cue
Indicate out fade times for getting smaller dimmer values.

Syntax

1. Store a new cue 1 with an out fade time of 4 seconds.
Store Cue 1 OutFade 4
2. Assign a out fade time of 5 seconds to the existing cue 3 on executor 1.
Assign OutFade 5 Cue 3 Executor 1

Example 1

Let´s assume, you will store a new cue on the main executor with an out fade time of 4 seconds.
Press Store 1 (= Cue 1) two times
Cue 1 is stored with an out fade time of 4 seconds.
Double check the cue timing in the

Example 2

Let´s assume, you will assign an out fade time of 5 seconds to the existing cue 3 stored on executor 1.
Press + Label (=Assign) two times
Cue 3 on executor 1 has now an out fade time of 5 seconds.

Related Links

Time Key
© 2022 MA Lighting Technology GmbH - Dachdeckerstr. 16 - 97297 Waldbüttelbrunn - Germany
Phone +49 5251 688865-27 - support@ma-dot2.com - www.malighting.com
Time (= OutFade) 4 Please
Cues View.
Time (= OutFade) 5 Cue 3 Exec 1 Please
Store
.
.
and press Time twice
1 of 2