Clarion NX807E Owner's Manual page 60

Note:
*1: Connecting the PHONE INTERRUPT terminal
The phone interrupt will mute the audio if the lead receives a negative or ground signal.
*2: This product is connected here to detect the distance the vehicle travels.
Always connect the vehicle's speed detection circuit. Failure to make this connection will increase
errors the vehicle's location display.
It is strong suggested that the speed pulse wire be connected for accuracy of navigation and better
performance.
*3: In case of user selects Audio signal : " Digital " ,and Digital Processor : " Others "
Connector A : " Amplifier turn-on cord "
Connector B : " Auto Antenna "
Please change the connection of connector 1 from connector A to connector B
Please use connector A as : " Amplifier turn-on cord "
Yellow
15A
*2 Pink Speed pulse
Black Ground
Orange/white Illumination
Blue Auto antena
Red +12V accessory
Brown Phone interrupt
Blue/white
Amplifier turn-on cord
Grass-green Parking brake cord
Purple/white Reverse gear cord
Purple/black Rear right -
Purple Rear right +
Gray/black Front right -
Gray Front right +
White Front left +
White/black Front left -
Green Rear left +
Green/black Rear left -
A
1
B
NX807E
59