Table of Contents
Advertisement
17 Transport, on-
hit and drain
17.1 Preparing the device for
transport
Tip:The device may contain residual
water and drip during transport.
Transport the device upright.
Requirements
sThe condensed water container is
emptied. Empty the condensation
container → Page 32
sThe device is turned on.
→ "Switch on device", page
29
Set any program → Page 29 .
1.
Start the program
2.
→ Page 29 and wait 5 minutes.
aThe condensation water has been pumped out.
Turn off the device.
3.
→ "Switch off the device",
page 30
Remove the water drain hose from
4.
the connection point.
→ "Drainage connection types",
page 15
Secure the water drain hose on the
5.
device against unintentional
loosening.
Make sure that the water
drain hose is not kinked.
Emptying the condensed water container
6.
→ Page 32 .
Push in the condensed water
7.
container → Page 32 .
Disconnect the plug of the device
8.
from the mains.
aThe device is ready for trans-
port wine.
Transport, storage and disposalNL
17.2 Disposal of your old
appliance
Environmentally friendly disposal
allows valuable raw materials to be
reused.
WARNING
Risk of health hazard!
Children can lock themselves in the
appliance and endanger their lives.
Do not install the appliance behind
▶
a door that blocks or prevents the
opening of the appliance door.
In the case of discarded appliances,
▶
remove the plug of the mains cable
from the socket, then cut the mains
cable and damage the lock of the
appliance door so that the appliance
door no longer closes.
Unplug the power cord from the
1.
outlet.
Cut the power cord.
2.
Dispose of the device in an environmentally friendly way.
3.
You can obtain information about the
current disposal methods from your
dealer and your municipal or district
council office.
This appliance is marked
in accordance with
ming with the European
Directive 2012/19/EU on
waste
electrical and electronic
43
Advertisement
Table of Contents
