Table of Contents
Advertisement
Tire Changing
Removing the Spare Tire and Tools
1. Wheel Wrench
2. Wheel Wrench Adapter
3. Wheel Wrench Extension
4. Tool Kit
5. Wheel Blocks
6. Jack
7. Strap
8. Jack Handle
To access the jack and tools:
1. Open the hood. See Hood 0 19.
2. Loosen and remove the two retainers by
turning counterclockwise. Remove the
jack and tools. Place the jack near the
tire being changed.
Vehicle Care
3. Open the tailgate. See Tailgate 0 28.
Remove both caps covering the hexagon
bolts.
4. Assembly the wheel wrench (1) and
wheel wrench adapter (2), and fit over
the hexagon bolt as shown.
Caution
Use of an air wrench or other power
tools with the carrier mechanism is not
recommended and could damage the
system. Use only the tools supplied with
the carrier mechanism.
5. Turn the wheel wrench counterclockwise
until a resistance is noticeable.
369
Advertisement
Chapters
Table of Contents
