Panasonic DVD-LV60 Service Manual page 45

10.6. Electrical confirmation (Confirming video output)
10.6.1. Confirming video output (luminance signal)
Check point
Measurement
point
Video S video
output output
terminal terminal
Measuring equipment
Oscilloscope
Purpose:
To maintain video signal output compatibility
1. Connect the monitor TV to the luminance signal (Y) of the S video
output terminal and terminate at 75 ohms.
2. Choose a color bar from the DVD test disc title (title 46 or title 12)
and play.
3. Confirm that the luminance signal output (including think chip)
has the following value.
10.6.2. Confirming video output (chrominance signal)
Mode Disc
Color bar DVDT-S15
play 75% or DVDT-
S20
Confirmation value
100 Vp-p ± 50 mV
45