Table of Contents
Advertisement
1
MMENUN (right soft key) #268
2
MbN: "On" a MOKN
3
MbN: Select the desired handset number
to monitor with. a MOKN
R "Baby Monitor" will be displayed.
R The registered handset name/number
is displayed.
Note:
R When this feature is on, another handset
can hear the monitored handset by making
an intercom call.
To monitor from an outside line
n From the phonebook:
1
MMENUN (right soft key) #268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor
from an outside line. a MEDITN a
MADDN
4
MbN: "Phonebook" a MOKN
5
MbN: Select the phonebook entry. a
MOKN 2 times
R "Baby Monitor" will be displayed.
Note:
R If you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1
MMENUN (right soft key) #268
2
MbN: "On" a MOKN
3
MbN: Select "External" to monitor
from an outside line. a MEDITN a
MADDN
4
MbN: "Manual" a MOKN
5
Enter the desired name. a MOKN
6
Enter the desired number. a MOKN 2
times
R "Baby Monitor" will be displayed.
Note:
R The registered name/number is displayed.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
TGH26xE_(en)_0203_ver120.pdf 43
Turning off the baby monitor
The monitored handset cannot be used while
baby monitor is set to "On".
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "Off" a MOKN a M
Editing an outside monitoring number
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line. a MEDITN
5
MMENUN a MbN: "Edit" a MOKN
6
Edit the name if necessary. a MOKN
7
Edit the phone number if necessary. a
MOKN 2 times
Erasing an outside monitoring
number
1
Press MMENUN on the handset being
monitored.
2
MbN: "On/Off" a MOKN
3
MbN: "On" a MOKN
4
MbN: Select the outside line. a MEDITN
5
MMENUN a MbN: "Erase" a MOKN
6
MbN: "Yes" a MOKN a M
Baby monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1
Press MMENUN on the handset being
monitored.
2
MbN: "Sensitivity Level" a MOKN
3
MbN: Select the desired setting. a MOKN
a M
N
Programming
N
N
43
2017/02/03 14:07:09
Advertisement
Table of Contents
