Philips 107E Electronic User's Manual page 78

The OSD Controls
6) To adjust the horizontal size, press the
7) When the size is adjusted, press the
CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST VERTICAL, press the
Smart
VERTICAL is highlighted. Next, start with step 3 under ADJUST VERTICAL and follow
Help
the directions.
. . . to exit completely, press the
ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this
feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or
controls the image on your screen, pushing it out toward the top or bottom or pulling it in toward the center.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST VERTICAL is highlighted.
file:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (8 of 27) [2002/7/7 ?? 11:05:02]
or button.
button to return to MAIN CONTROLS window. CLOSE MAIN
button
RETURN TO TOP OF THE PAGE
button until ADJUST