Advertisement
4. Secure cover on the Two-Wire PCBA as shown
(Figure 3).
5. Power on controller.
6. Follow instructions from the DXi User Manual to
program two-wire decoders at the controller.
In short, connect the programmed Two-Wire decoders
Figure 3
©2021 The Toro Company • www.toro.com
WARNING: Cancer and Reproductive harm – www.P65Warnings.ca.gov.
!
For more information, please visit www.toro.com/CAProp65.
Patent: www.ttcopats.com
using the red-black terminals at the newly installed Two-
Wire PCB Assembly Programming Port (Figure 4).
Red wire to red, black wire to BLK.
7. After programing, stations and sensors at the decoder
can now be controlled from the controller display and
from central software.
Figure 4
Programmer
Port
5825 Jasmine Street
Riverside, CA 92504
800-777-1477
irrigationsupport@toro.com
to decoder
Part Number 373-1069 Rev. A
Advertisement
