Maintenance And Storage - GRE RBR75 Instruction Manual

MAINTENANCE AND STORAGE

1. The battery discharges itself during storage.
Make sure the robot is fully charged before
storage.
2. When not in use, you must recharge the battery
at least every three months.
•Unplug the external adapter from the socket and
then the charging cable from the external adapter
and the robot.
•Remove the attachment from the robot. If
necessary, rinse the robot and accessories with
clean water. Do not use detergent.
Maintenance and replacement of impeller:
Recommended tool (not included): screw driver
1.
Maintenance and replacement of the wheels:
Note: the main wheel on this side has magnets.
Please contact your dealer for spare parts or
maintenance work.
2.
Main wheel
•Before storage, make sure the robot is drained.
•Use a wet cloth to clean and dry the robot and its
accessories.
•Store in a well ventilated place away from sunlight,
heat, fire sources, pool chemicals and children.
•The storage environment temperature should be
10ºC – 25ºC (50 °F – 77°F ).
Note: higher storage temperatures may shorten
battery life.
Steering wheel
3.
Impeller
EN