Setup And Function; Features Of Function And Equipment - Busch-Jaeger 1094 Operating Instructions Manual

Operating Instructions
Temperaturregler
Pos: 20 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Aufbau und Funktion @ 11\mod_1279185435352_15.docx @ 83027 @ 1 @ 1
6

Setup and function

Pos: 21 /#Neustruktur#/Online-Dokumentation (+KNX)/Aufbau und Funktion/Temperaturregler/Verwendung 1094....1097, 1098 @ 26\mod_1342766379475_15.docx @ 224403 @ @ 1
The temperature controller is used to control the temperature in closed rooms.
Pos: 22 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Funktions- und Ausstattungsmerkmale @ 23\mod_1336557630140_15.docx @ 209136 @ 2 @ 1
6.1

Features of function and equipment

Pos: 23 /#Neustruktur#/Online-Dokumentation (+KNX)/Aufbau und Funktion/Temperaturregler/Funktionen 1094....1097 @ 26\mod_1342708498968_15.docx @ 224389 @ @ 1
Article no. Features / Function
1094 ... • Opens when the set temperature is reached.
• With separate connection for time-controlled reduction of nighttime temperature (4K).
• Servo valves of "closed when de-energized" design are required for the controller.
1095 ... • Opens when the set temperature is reached.
• With normally open contact (not applicable for 1095 UF)
• With separate connection for time-controlled reduction of nighttime temperature (4K).
• With installed sliding switch and control lamp for nighttime temperature reduction (4 K).
• Servo valves of "closed when de-energized" design are required for the controller.
... UF • With normally closed contact
• With remote sensor (external temperature sensor for mounting in the floor) and thermal feedback.
• For electric underfloor heating
• Opening of the relay contact, when the set temperature is reached.
1096 ... • Opens when the set temperature is reached.
• With separate connection for time-controlled reduction of nighttime temperature (4K).
• With installed sliding switch and control lamp for nighttime temperature reduction (4 K).
• Servo valves of "closed when de-energized" design are required for the controller.
1097 ... • With switchover contact (heating / cooling)
• Servo valves of "closed when de-energized" design are required for the controller.
... UTA • With display of actual temperature
- Temperature display in steps of 0.5°C
• Display accuracy: ±0,5°C for load currents of ≤2 A
– Display accuracy: ±1,5°C for load currents of >2 A
• Automatic controller calibration
Pos: 24 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1
Operating Instructions | 1473-1-8289
Setup and function
— 6 —