ViewSonic LS832WU User Manual page 46

Menu
Image Settings
Signal
Adjust the signal options.
Setting
Automatic
Frequency
Phase
H. Position
V. Position
NOTE: This menu is only available if the input source is
RGB/Component.
Brightness Mode
Mode
Dynamic Black
Eco
Constant Power
Reset
Return current display mode settings (Brightness, Contrast,
Sharpness, Color, Tint, Gamma, Brilliant Color™, Color
Temperature, Color Matching, RGB Gain/Bias, Color Space,
Brightness Mode, Signal settings) to default values.
46
Description
Description
Automatically configure the signal
(Frequency and Phase will be grayed
out). If Automatic is disabled,
Frequency and Phase can be then be
adjusted.
Change the display data frequency
to match the frequency of your
computer's graphics card. Use this
function only if the image appears to
flicker vertically.
Synchronize the signal timing of the
display with the graphics card. If the
image appears to be un stable, use
this function to correct it.
Adjust the horizontal positioning of
the image.
Adjust the vertical positioning of the
image.
Description
Automatically adjust the picture
brightness in order to give optimum
contrast performance.
Dim the light output, lowering
power consumption.
Select the power percentage
(20%~100%) for brightness mode.