Mitsubishi WT-46809 Owner's Manual page 33

SETUP Menu: TV Speakers and A/V Receiver
MAIN MENU
SETUP MENU
AV CONNECTION menu
(Home Theater)
AV Network
TV Speakers
(Internal)
AV Receiver
Audio Output
TV Volume Control
ADJUST to select item then
move to and change option
MENU to return
Figure 1. TV Speakers
MAIN MENU
SETUP MENU
AV CONNECTION menu
(Home Theater)
AV Network
TV Speakers
(Internal)
AV Receiver
Audio Output
TV Volume Control
ADJUST to select item then
move to and change option
MENU to return
Figure 2. A/V Receiver
: Off
:On
:Mits A
:Variable
: Off
:On
:Mits A
:Variable
TV Speakers
(Figure 1)
This selection will turn on or off the
TV's internal speakers. You may select
Off when sending the sound through a sepa-
rate stereo system or surround sound A/V
receiver.
To prevent damage from a sudden
increase in volume, make sure the TV
volume is low before choosing ON.
A/V Receiver
(Figure 2)
Whether or not you have connected the mon-
itor video output of an A/V receiver to the
TV's INPUT-1 video input, you will need to
set the A/V Receiver correctly to one of the
following:
None:
When you have not connected an
A/V receiver monitor video output to the
TV's INPUT-1 video input.
Mits-A:
When you have connected a Mit-
subishi digital A/V receiver (digital surround
sound) model M-VR800 or M-VR1000.
This also activates the Home Theater IR
System. See Remote Control Functions:
Home Theater IR System, page 57, for oper-
ating information.
Mits-B:
When you have connected a Mit-
subishi digital A/V receiver (digital surround
sound) model M-VR700, M-VR900, or other
model introduced in 1999 or later. This
also activates the Home Theater IR System.
See Remote Control Functions: Home The-
ater IR System, page 57, for operating infor-
mation.
Other:
When you have connected any other
Mitsubishi A/V receiver or another brand of
A/V receiver. This also blocks signal output
from the TV Monitor output when the TV is
set to INPUT-1.
Part III: Setup
33
33