Mitsubishi WT-46809 Owner's Manual page 12

Part II: Installation
Front Control Panel
Many remote control buttons are duplicated on the front control panel. These buttons are
shaded in figure 1. Please see Remote Control Functions, pages 54-61, for an explanation
of their usage.
TIMER POWER
Figure 1. Buttons can also be used for ADJUST, ENTER, MENU, and CANCEL, while in the menus.
IRIS™
Intelligent Room Illumination (light) Sensor. Turn this feature on or off using the VIDEO
button on your remote control. When the IRIS is on, your TV will automatically adjust
picture contrast and brightness for the best picture based on your room lighting. When on,
do not block the sensor to ensure an optimum picture.
TIMER
Timer
During normal operation, the timer light will glow steady green when the TV is on, and
not glow when the TV is off. When the TV is set to turn on at a specific time, the green
timer light will blink while the TV is off. Please see Timer Menu, pages 45-46, for timer
setup instructions.
A/V RESET
A/V Reset
CANCEL
Press this button to reset the A/V memory on all nine inputs to the factory default settings.
Please see Audio/Video Settings Menu, page 49, for instructions.
S-VIDEO
This input can be used for convenient connection of a camcorder or other video device
to the TV. Please note that you may connect to the S-VIDEO or VIDEO terminal, but
not to both.
12
12
ENTER
VOL CH
ADJUST
ADJUST
VIDEO L-AUDIO-R
Input 4
MENU A/V RESET INPUT
ENTER MENU CANCEL
L-AUDIO-R
S-VIDEO VIDEO
INPUT-4