Table of Contents
Advertisement
Initial Setup
CHANNEL SUMMARY
CHANNEL SUMMARY lets you customize the list of channels set after you run AUTO TUNER
SETUP. You may delete unwanted channels or add channels that are new, or were not picked
up by AUTO TUNER SETUP because of weak signals.
To access the CHANNEL SUMMARY, use the
SUMMARY option in the INITIAL SETUP menu. Select the option by pressing
The CHANNEL SUMMARY screen will now
be displayed with the channels set to scan
marked with an "
channels from the scan by removing the
"
AUTO TUNER SETUP and you wish to
add them, you may by placing an "
next to the channel number.
To add or delete channels, use the
arrows to move to the SCAN column. Use the
Press
all the channels you wish, you can leave the CHANNEL SUMMARY screen by pressing E
the remote control.
CHANNEL SUMMARY - LOCK
You can also use the CHANNEL SUMMARY screen to lock certain channels. When a channel
is locked, a code must be entered before the channel can be viewed.
CHNO.
01
02
03
04
05
CHANNEL GUARD MESSAGE
When a viewer attempts to watch a guarded channel, this message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad (see "Set Lock
Code" - page 38). If the wrong code is entered, the
message INVALID LOCK CODE! will flash on the
screen. The channel cannot be accessed until the
correct code is entered.
• Once a channel has been unlocked, it will
remain unlocked until the
television is turned off.
32
Downloaded from:
https://www.usersmanualguide.com/
". You can delete
". If any channels were missed during
or
to include or delete channels from scanning. When you have added or deleted
SCAN
CHNO.
06
07
08
09
10
arrows to move to the CHANNEL
CHNO.
SCAN
01
02
03
04
"
05
arrows to move through the list of channels.
To lock or unlock channels, use the
SCAN
arrows to move to the Lock column
(marked with the
arrows to move though the list of
channels. Press the Z
remote control to lock or unlock a specific
channel. A channel is locked when the
icon appears next to it. When you are
finished, you can leave the CHANNEL
SUMMARY screen by pressing E
remote control.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
.
or
CHNO.
SCAN
06
07
08
09
10
on
XIT
icon). use the
button on the
ERO
on the
XIT
NO. - - - -
Advertisement
Table of Contents
