Search Codes - JVC AV-56WP30/A User Manual

Search Codes

Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV P
3) Press TV P
4) If there was a response, press R
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use
the remote control which came with the equipment.
5) Press R
VCR Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR".
2) Press the VCR P
3) Press VCR P
4) If there was a response, press R
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use
the manufacturers remote control which came with the VCR.
5) Press R
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
2) Press the DVD P
3) Press DVD P
4) If there was a response, press R
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use
the manufacturers remote control which came with the DVD player.
5) Press R
Downloaded from: https://www.usersmanualguide.com/
Remote Programming
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the CATV or Satellite box responds.
OWER
ETURN
+ to exit.
ETURN
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the VCR responds.
OWER
ETURN
+ to exit.
ETURN
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the DVD player responds.
OWER
ETURN
+ to exit.
ETURN
+. The operating codes are now set. If there was no
+. The operating codes are now set. If there was no
+. The operating codes are now set. If there was no
25