Search Codes - JVC AV-61S902 User Manual

AV-61S902(E) 1/12/01 3:23 PM Page 25

Search Codes

Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV P
3) Press TV P
OWER
4 )If there was a response, press R
Step 3. If you repeat Step 3 a total of 52 times without a response, use the remote control which came with the
equipment.
5) Press R + to exit.
ETURN
VCR Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR".
2) Press the VCR P
3) Press VCR P
OWER
4) If there was a response, press R
Step 3. If you repeat Step 3 a total of 80 times without a response, use the manufacturers remote control which
came with the VCR.
5) Press R + to exit.
ETURN
DVD Player Search Codes Function:
1) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
2) Press the DVD P
3) Press DVD P
OWER
4) If there was a response, press R
Step 3. If you repeat Step 3 a total of 30 times without a response, use the manufacturers remote control which
came with the DVD player.
5) Press R + to exit.
ETURN
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the CATV or Satellite box responds.
+. The operating codes are now set. If there was no response, repeat
ETURN
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the VCR responds.
+. The operating codes are now set. If there was no response, repeat
ETURN
and R + buttons. Hold for at least three seconds and release.
OWER ETURN
, see if the DVD player responds.
+. The operating codes are now set. If there was no response, repeat
ETURN
Remote Programming
25