Loading The Button Cells - JVC FLASH PATH VU-V101E Instructions Manual

FLOPPY DISK ADAPTER VU-V101

Loading the Button Cells

The VU-V101 uses 2 CR2016 lithium button cell batteries.
The table below is a guide to the time for which the lithium batteries can be
used (at normal temperatures).
SmartMedia Used
Battery consumptionl varies between different brands.
Based on our tests, Sanyo and Maxell batteries provide the most consistent
performance with the VU-V101. The above figures are for Sanyo and Maxell
batteries.
1
Rotate the battery cover in the direction of the
arrows to open it.
Place the VU-V101 on a level surface and rotate the battery
cover counter-clockwise until it clicks while pressing on the
indentations in the cover with your fingertips.
2
Insert the CR2016 button cells with the + side
upwards.
Check that surfaces of the cells are touching the contacts on the
inside of the cover.
NOTE
10
Downloaded from:
5V
3.3V
Ensure that the contacts are not pinned under the batteries.
https://www.usersmanualguide.com/
Continuous Read
Approx. 2.4 hours
Approx. 10 hours
Contact
Continuous Write
Approx. 1.4 hours
Approx. 5 hours