Britax MARATHON CLICKTIGHT Canadian User Manual page 43

8. Nest the end of the left
harness strap into the
right.
9. Slide the harness straps
completely onto the yoke.
Ensure that the adjuster
and harness straps are
not twisted and that
the ends of the harness
straps are securely
attached to the yoke.
IMPORTANT:
pads in a safe location when
not in use.
Replacing the Impact Absorbing Chest Pads
1. Loosen the harness.
a. Press harness release
button.
b. Pull both harness
straps forward.
2. Adjust the harness to
the lowest position and
unhook the harness
straps from the yoke at
the back of the child seat.
NOTE: Do not pull on
the harness adjuster
strap after removing the
harness straps from the
yoke.
3. Pull one harness strap
through the harness slot
to the front of the seat.
4. Route the harness strap
out of the comfort pad
and chest clip.
5. Reroute the harness strap
through the chest pad,
chest clip, and comfort
pad.
6. Repeat for other strap.
MARATHON CLICKTIGHT User Guide
Store the chest
Table of Contents
1b
1a
41