Britax MARATHON CLICKTIGHT Canadian User Manual page 40

Britax Child Safety, Inc.
6. Replace the head pad.
a. Loosen the harness
and raise the head
pad to the highest
position.
b. Slide on the head pad
to install.
c. For select cover sets
only (if applicable):
Reattach the elastic
strap around the
headrest adjuster.
d. Reattach the hook
and loop fasteners
on the head restraint
around the harness.
7. Replace the comfort
pads.
Harness Buckle
IMPORTANT:
seat, you will need to check the buckle periodically and rinse
out any accumulated debris (see page 43).
Removing the Harness Buckle
1. Unbuckle the
harness and open the
CLICKTIGHT.
2. Lift the front of the seat
cover and pull over the
CLICKTIGHT bezel to
access the buckle strap
connection.
3. Remove the harness
buckle by turning the
buckle strap sideways
and routing the retainer
out of the front buckle
slot in the child seat.
38
If your child eats and drinks while in the child
Table of Contents