Britax MARATHON CLICKTIGHT Canadian User Manual page 31

To remove the lower connectors:
1. Push the lower connector
adjuster release button
to loosen the lower
connector strap.
2. Push down in the seating
area and open the
clicktight.
3. Squeeze the lower
connector hook and lift
off the lower anchor.
Impact Absorbing Tether
Failure to follow the guidelines below may cause the child
seat not to perform as intended.
• Britax recommends that the tether be used when installing
the child seat forward facing. Using the tether will improve
the stability of your child seat and reduce the risk of injury.
• Attach the tether only to tether anchors identified by your
vehicle manufacturer as tether anchorage points. Only use
the designated tether anchor for each seating position.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or contact
your vehicle man u fac tur er for assistance. DO NOT modify
your vehicle without advice from your vehicle manufacturer.
• Store the tether in the compartment on the back of the child
seat when not in use.
Tether anchor locations vary from
vehicle to vehicle. Check your vehicle
owner's manual for tether anchor
capacities and look for the tether
anchor symbol shown in the diagram
to help identify where the top tether
anchor points are located in your
vehicle.
MARATHON CLICKTIGHT User Guide
WARNING!
Table of Contents
29