Operation - AEG ATB48D1AW User Manual

14. Screw the remaining 2 screws on the top
side of the appliance with no hinge.
15. Place the top cover on the appliance and
tighten the screws on the back.

4. OPERATION

4.1 Control panel
1. Temperature indicator
2. Super Freeze indicator
4.2 Switching on
Insert the plug into the wall socket.
10 ENGLISH
Install the door equipment.
Wait at least 4 hours before connecting the
appliance to the power supply.
3.7 Installation of a door handle
If there is a door handle provided in a bag
separately, you can install it as follows:
1. Remove the screws from the holes on the
2. Take the handle out of the bag.
3. Match the handle holes with the holes in
4. Screw the handle with the previously
5. Take out the screw covers out of the bag
1 1
°C
-16 -18 -20 -22
3. Control button
4.3 Switching off
To turn off the appliance, remove the plug
from the power socket.
side of the door.
the door.
removed screws.
and put them on the top of the screws.
2 2 2 3
3sec