Operation - AEG ATF851 User Manual

14. Screw the remaining 2 screws on the top
side of the appliance with no hinge.
15. Place the top cover on the appliance and
tighten the screws on the back.

4. OPERATION

4.1 Switching on
1. Insert the plug into the wall socket.
2. Turn the temperature regulator clockwise
to a medium setting.
4.2 Switching off
To turn off the appliance, remove the plug
from the power socket.
4.3 Temperature regulation
The temperature is regulated automatically.
However, you can set the temperature inside
the appliance.
64 ENGLISH
Install the door equipment.
Wait at least 4 hours before connecting the
appliance to the power supply.
3.7 Installation of a door handle
If there is a door handle provided in a bag
separately, you can install it as follows:
1. Remove the screws from the holes on the
side of the door.
2. Take the handle out of the bag.
3. Match the handle holes with the holes in
the door.
4. Screw the handle with the previously
removed screws.
5. Take out the screw covers out of the bag
and put them on the top of the screws.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator clockwise
to obtain a lower temperature inside the
appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.