Configuring The Mega Macs X; Setting Company Data; Entering Company Data; Installing Password Protection - Hella Gutmann mega macs X User Manual

Hella Gutmann

8. Configuring the mega macs X

Configure all interfaces and functions under

8.1. Setting company data

Enter the company data that shall appear on the hard-copy printout, e.g.:
• Company address
• Fax number
• Homepage

8.1.1. Entering Company Data

Proceed as follows to enter the company data:
1. Select > Settings > User profile > Company data.
2. Enter the company name in the text field under Company name.
3. Repeat step 2 to make further entries.
ð The input will be saved automatically.

8.2. Installing Password Protection

The introduction of the General Data Protection Regulation (GDPR) of the European Union which came into force on 25
May 2018 includes the requirement to ensure better protection for customer-related data in devices.
To prevent access to our diagnostic devices by third parties, we have integrated the function Password protection.
NOTICE
Due to legal requirements concerning third party access, the diagnostic device can only be reactivated via
the function >Starting the factory reset< or the Technical Hotline of Hella-Gutmann Solutions. In this case
the personal data and the Car History will be cleared and might possibly not be restored.
Proceed as follows to set up the password protection:
1. Select > Settings > User profile > Password protection.
2. Enter a password in the text field under Password.
3. Confirm your entry under Repeat password.
4. Observe the warning notice and confirm.
ð You can now access the diagnostic device only with the selected password.
mega macs X
>Settings.
Configuring the mega macs X | 8.
139