Table of Contents
Advertisement
Check all inlets and outlets from
♦
time to time for accumulated dust.
Disconnect the unit from mains
♦
outlet when it is not in use, or
before relocating or cleaning it.
Switch off, remove the plug from
♦
the socket and let the appliance
cool down before leaving it
unattended and before changing,
cleaning or inspecting any parts of
the appliance.
When not in use, the appliance
♦
should be stored in a dry place.
Children should not have access to
stored appliances.
Inspections And Repairs
Do not attempt to dismantle, repair
♦
or remould any part of the unit. This
should only be done by a qualified
service agent. Even the change of
power cable should be done by a
qualified person.
In the unlikely event the appliance
♦
develops a fault, stop using it
immediately and seek advice from
the manufacturer.
In case of technical problems,
♦
switch off the product and do not
attempt to repair it yourself. Return
the appliance to an authorised
service facility for examination,
adjustment or repair. Always
insist on the use of original spare
parts. Failure to comply with the
above mentioned precautions and
instructions, could affect the safe
operation of this product.
(Original instructions)
Additional Safety Instructions for
This Appliance
Install the unit on flat and hard floor
♦
to diminish vibration or noise.
Always operate the appliance on a
♦
smooth, even, stable surface. Do
not place the unit on a hot surface.
Ensure that the unit is switched off
♦
after use.
Do not immerse cables, plugs or
♦
any part of the appliance in water
or any other liquid.
Operate the unit only at the voltage
♦
specified.
Do not use the unit near open
♦
windows, as contact with rain and
other natural elements could cause
an electrical hazard
Do not put heavy objects on the
♦
appliance.
Do not tip the unit on its side.
♦
Never insert any other object into
♦
the unit body to avoid any hazard
or unit failure.
Do not put the unit close to
♦
heat-generating devices or
near flammable and dangerous
materials.
If the supply cable is damaged,
♦
it must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
For optimal airflow circulation,
♦
leave a distance of at least 1 metre
around the appliance on every side.
ENGLISH
5
Advertisement
Table of Contents
