Operation; Preoperational Checklist - Baldor POW'R LITE PL6000K Installation & Operating Manual

Section 4

Operation

Preoperational Checklist

Before the POW'R LITE is put into service, the items in Table 4-1 must be checked.
-
Check unit for obvious structural damage.
-
Make sure light mast is secure.
-
Check that light fixtures are secured in place.
-
Check that front and rear jacks are secure into position and operate properly.
-
Inspect tires for damage.
-
Make sure tires are inflated to 32 psi and that lug bolts are tightened to 90 lb−ft.
-
Inspect engine/generator parts for any obvious damage or loose parts.
-
Inspect control panel for damage or loose fasteners.
-
Inspect mast wiring for cuts, abrasions, and loose connections.
-
Check light fixtures for lamp, reflectors, and lens damage.
-
Inspect both winches, cables, cable clamps, and pulleys for damage and proper operation.
Light
Fixtures
Outriggers
MN2488
Table 4-1 Pre−Operation Checklist
Figure 4-1 POW'R LITE Component Identification
Mast
Lock
Muffler
Trailer
Lift
Slot
Lift Lift
Slots Winch
Trailer
Engine
Compartment
Lift
Slot
Light Mast
Tilt Lock
Jack
Tilt
Safety
Winch
Tow
Chains
Bar
Operation 4-1
Coupler Handle
Coupler