Table of Contents
Advertisement
Set Auto Format Layouts (cont.)
Table
Set the number of rows and columns to
Format
create a label template.
[Auto Format]
[Table Format]
Select a tape width
[Rows]
value
[Columns]
value
/
/
Repeat for each text field
/
Print Labels
Preview
Use this feature to preview the label before
printing.
Print
Start printing.
When printing a single label:
/
When printing multiple labels:
Select a print quantity
/
/
Numbering
Set this feature when printing consecutive
Print
alphanumeric characters.
+
Enter alphanumeric characters
[Number]
Set the start position
Set the end position
Select a print quantity
/
/
Mirror
Print reversed from left to right.
Print
Print on clear tape and attach it to the inside
+
of glass to create a label that can be read
from the outside.
Enter text
/
Barcode
Create a barcode and print it.
Printing
[Barcode]
Select a setting item
Change the setting content
Enter barcode data
Select a signal
Other
Feed &
Feed approximately 0.9" (23 mm) of tape to
Cut
remove any slack, and then cut it.
+
Tape may have some slack when it is
loaded.
+
Other (cont.)
Save
/
/
/
Set a
Set a
Enter text
For more information, see the User's Guide on the Brother support website at support.brother.com.
Symbols and Frames
Symbol Examples (
/
Auto Format Layouts Examples (
+
/
/
For more information about symbols and frames, see the User's Guide on the Brother support website at support.brother.com.
/
Set Margins
The laminate mechanism creates a margin of approximately 0.9" (23 mm) at the beginning of printing. You can reduce this margin by printing labels continuously.
You can also change the margin before and after the text for the second and subsequent labels when printing multiple labels.
Select [Chain] to print labels with the narrowest margin width. DO NOT feed the tape until the final label is printed. When the final
label prints, cut it manually using the [Feed & Cut] function.
: Print area
ABC A
+
[Mirror]
/
/
Large Margin
/
0.08"
/
(2 mm)
ABC
/
/
Approx. 0.9"
(23 mm)
Chain
0.08"
(2 mm)
ABC
Approx. 0.9"
(23 mm)
Save your labels and access them later to
edit and print them, as well as overwrite and
save edited data.
Maximum data: 99 files
Maximum character count per file: 280
characters
Create a label
/
Select a save destination
/
)
[Auto Format])
: Margin
Small Margin
When the label length is approximately
0.9" (23 mm) or more
0.08"
0.08"
0.08"
(2 mm)
(2 mm)
(2 mm)
ABC
Approx. 0.9"
Approx. 0.9"
Approx. 0.9"
Approx. 0.9"
(23 mm)
(23 mm)
(23 mm)
(23 mm)
No Cut
0.08
"
0.08"
(2 mm)
Cut Position
(2 mm)
ABC
0.08"
Approx. 0.9"
(2 mm)
(23 mm)
Reset
Reset the internal memory. For example, to
reset the Label Maker or delete any saved
label data.
Select a reset method
[Save]
Frame Examples (
...
Accented Character Examples (
...
: Laminate Margin
Small Margin
When the label length is approximately
0.9" (23 mm) or less
0.08"
0.08"
0.08"
(2 mm)
(2 mm)
(2 mm)
ABC
ABC
Approx. 0.9"
0.08"
(2 mm)
Special Tape
0.08"
(2 mm)
ABC
ABC
0.08"
Approx. 0.9"
(2 mm)
[Settings]
/
[Reset]
/
/
Confirmation message
/
[Frame])
...
)
...
0.08"
(2 mm)
A
A
0.08"
Approx. 0.9"
(23 mm)
(2 mm)
(23 mm)
0.08"
0.08"
0.08"
(2 mm)
(2 mm)
(2 mm)
ABC
ABC
0.08"
(23 mm)
(2 mm)
Advertisement
Table of Contents
