Operation / Cleaning and Care
Note: If the energy cost monitor is disconnected from the socket,
the display will go out. The data are, however, stored and will
re-appear when the device is re-connected to the mains supply.
At the same time, press button "-" 4 and "+" 5 for
about 3 seconds to set the value of energy consumption
and energy costs to 0.
©
Cleaning and Care
WARNING!
ELECTRIC SHOCK! Keep the wattmeter away from rain
and moisture. If water enters the wattmeter there is an
increased risk of an electric shock.
WARNING!
TRIC SHOCK! Before carrying out any work on the prod-
uct or on an electrical appliance connected to it, remove the
wattmeter from the outlet.
Clean the wattmeter with a dry, non-fluffing cloth.
38 GB
RISK OF FATAL INJURY BY
RISK OF FATAL INJURY BY ELEC-