Bosch CTL836E 6 Series Instruction Manual page 60

Fully automatic espresso machine
Hide thumbs Also See for CTL836E 6 Series:
Table of Contents

Advertisement

Available languages

Available languages

en
Service programmes
Cleaning
Takes about 5 minutes.
■ Touch E�
■ Touch [ Clean ] to select the programme.
■ The display indicates the progress
of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace.
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
■ Close the appliance door.
■ Place a container with a capacity of
0.5 litre under the beverage outlet.
■ Press C. The cleaning programme will
now run for about 5 minutes.
■ Remove the container, empty the drip trays,
replace and close the appliance door.
■ Press C. The appliance has finished
cleaning and is ready for use again.
■ Touch E to exit the program�
Calc'nClean
Takes about 26 minutes.
Calc'nClean combines the functions
Descale and Clean. If both programmes
are due to be carried out close together, the
fully automatic coffee machine will automat-
ically suggest this service programme.
■ Touch E�
■ Touch [ Calc'nClean ] to select the
programme�
■ The display indicates the progress
of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace.
■ Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again.
■ Remove the water filter (if there is one)
and press C
■ Pour lukewarm water into the empty
water tank up to the "0.5 l" mark and
then dissolve one Bosch descaling tablet
TCZ8002N in it.
60
F
If there is not enough descaling
solution in the water tank, you will be
asked to do the following. Refill using
uncarbonated water and press C
again�
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the coffee
grounds container�
■ Close the appliance door.
■ Place a container with a capacity of
0.5 litre under the beverage outlet.
■ Press C. The programme will now run
for about 19 minutes�
■ Remove the container and press C�
■ Rinse the water tank and (if removed)
replace the water filter.
■ Fill the tank with fresh water up to the
"max" indicator.
■ Replace the water tank and close the
door�
■ Place the container underneath the
beverage outlet again.
■ Press C. The programme will now
run for about 7 minutes and rinse the
appliance.
■ Remove the container, empty the drip
trays, replace and close the appliance door.
■ Press C. The appliance is descaled,
cleaned and ready for use again.
■ Touch E to exit the program�
Special rinsing
F
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
■ Rinse the water tank and refill it with fresh
water up to the "max" mark.
■ Press C. The programme will now
run for about 2 minutes and rinse the
appliance.
■ Empty the drip trays, replace and close
the appliance door. The appliance is
ready for use again.
■ Touch E to exit the program�

Advertisement

Table of Contents
loading

Table of Contents