Change Settings; Troubleshooting - Lippert Components OneControl Touch Panel 3.0 OCTP Owner's Manual

Change Settings

1. Tap the gear icon (Fig. 5B) at the top of the screen.
A. Diagnostics - App Version: Option for System Report and a snapshot summary of all available
devices connected to the system.
B. Resync - removes "off-line" devices. This option is used to resync the system devices after one has
been removed, serviced or repaired and shown to be off-line.
C. Units - shows the currently selected temperature unit of scale (Fig. 8A). Tap
Fahrenheit to Celsius.
D. System Clock (Fig. 8B) - tap

Troubleshooting

What is Happening
OCTP does not
turn on.
OCTP is on, but no
display
Installed device not
available.
Rev: 03.30.23
>
(Fig. 8C) to adjust the time and date of the OCTP.
B
Why?
No power.
Program not loaded.
Device not configured.
Fig. 8
What Should Be Done?
Make sure system power is on, the OCTP power
cable is connected, and the power button on the
bottom of the unit has been pressed.
Contact Lippert Customer Care Center at
432-LIPPERT (432-547-7378)
Contact Lippert Customer Care Center at
432-LIPPERT (432-547-7378)
Page 9
>
to change from
A
C
CCD-0007179