Page 1
UK office: Ipswich AU office: Truganina USER'S MANUAL Contact Us! FULL BED WITH TRUNDLE HU10293 US: cs.us@costway.com UK: cs.uk@costway.com Contact our friendly customer service department for help first. AU: cs.au@costway.com THIS INSTRUCTION BOOKLET CONTAINS INPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Before You Start Never use water to clean your furniture as it may cause damage to the finish.
Part List STEP 9: Horizontal HB/FB - 3pcs Leg HB (Left front) - 1pc HB Frame - 1pc 2PCS 8PCS Leg HB (Left back) - 1pc Leg FB (Right front) - 1pc Leg FB (Right back) - 1pc Upper Horizontal - 2pcs Side rail - 2pcs Support slat - 1pc Front panel of trundle - 1pc...
Page 5
STEP 7: STEP 1: 4PCS 8PCS 8PCS 8PCS STEP 8: 14PCS Note:Part 4 will face up with the "x" mark on it, otherwise it cannot be tightened STEP 2: 234mm Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break.
Page 6
STEP 5: STEP 3: 6PCS 6PCS Attach leg support (K) to lower support slat (J), then rotate to secure. Move support slat inside Full bed. Note:Part 4 will face up with the "x" mark on it, STEP 6: otherwise it cannot be tightened 20PCS STEP 4: 12PCS...
Need help?
Do you have a question about the HU10293 and is the answer not in the manual?
Questions and answers