Advertisement
Ba ery Charging
To charge the internal ba ery, use the supplied charger that provides
op mized charging parameters. The USB type C charging port has been
placed next to the LED controls on the electronics cover, on the backside
of the instrument.
A er the charger is plugged into the USB type C charging port and the
mains socket, the charging process begins. This is shown by a con nuous
light that is emi ed by the first yellow LED on the right (CHARGING).
Should you be charging the ba ery a er it has been depleted completely,
the charging me would last around 3 hours.
When the ba ery is fully charged, the yellow charging LED switches off
and the other green LED (labeled FULL) lights up. Even though the applied
charging module features overcharging protec on, it is recommended
to unplug the charger when the ba ery is fully charged for safety reasons.
At any moment of the charging process. You may also leave it plugged in.
However, this entails a risk of damaging the charger socket and the plug
if we forget that the instrument is plugged in.
Note: When charging, and regardless of ba ery charge levels, all four LEDs would light up. Thus,
using the ba ery charge indicator when charging remains pointless. If a need emerges to check
the ba ery level during charging, one needs to disconnect the charger and wait several minutes,
for the readout to be as credible as possible.
The instrument comes together with a universal EURO plug charger that may be powered
by voltages ranging from 110 to 240V @ 50 - 60 Hz. Should you use the charger in areas where
no socket compa ble with the Euro plug is available, a proper adapter should be applied
(one should purchase an adapter as such separately).
Due to its small dimensions and the delicate nature of the USB type C port and the charger
plug, one should be very cau ous when plugging the charger in and during the charging
process. In no circumstances use excessive force when plugging the charger in, or when
removing its plug. Should any issues occur there, inspect the status of the plug and the charging
input carefully. The input should be clear from any objects and dirt. Do not use the charger if the
plug, or any other part of the charger, has been damaged. In no case should you use force to
remove the cable. You should not remove the plug at an angle as well.
Mayones Musashi Nitōryū 2.0 Preamp - User Manual
www.mayones.com
USB C socket
- 9 -
Advertisement
