Advertisement
Your new Mayones bass now features Musashi ac ve onboard preamp with a three-band
EQ developed at Mayones, based upon years of R&D and consul ng efforts, involving leading
musicians all around the world. The preamp provides the user with a broad adjustment range
in the low, mid, and high frequencies, while the opera on profile is op mized for bass pickups.
The whole system of electronics features many unique solu ons boos ng the levels of
instrument func onality. The presence of an embedded Nitoryu 2.0 stereo headphone amp
with stereo AUX-in input is one of the key features as such. It allows the user to plug in a signal
coming from an external device, such as a smartphone.
The push-pull switch integrated into the volume knob allows one to bypass the preamp and
use the instrument in an en rely passive mode. In such a case, one can con nuously adjust the
pickups' tone, as it happens in the case of conven onal basses. The last knob of the circuitry
- Tone - is used for that. This is a func on made for bass players who enjoy passive tone or use
external preamps and FX processors, where most of their tone design efforts happen.
No more ba ery problems! The Musashi preamp, along with the Nitoryu 2.0 headphone
amp, are both powered by a special module, powered by an onboard lithium-polymer ba ery.
You can check the ba ery status at any given moment, thanks to the presence of a four-
segment ba ery charge level meter.
If for some reason you forget to charge the ba ery, and the stage awaits, you can also use
a standard 9V ba ery for the Musashi preamp. The 9V ba ery chamber is user-friendly, and
easily accessible, thanks to a func onal, magne cally-a ached cover. No tools are needed in
the process. Thanks to the special design, it's enough to press the ba ery cover with an index
finger, the cover would be li ed, and then it can be freely removed. Remember to switch the
power source!
- 2 -
Mayones Musashi Nitōryū 2.0 Preamp - User Manual
www.mayones.com
Advertisement
