Table of Contents
Advertisement
FILTER REPLACEMENT
*Please refer to the instructions for the lifespan of the filter. The filter's lifespan is calculated based on filtering 2-5L of water per day
with a TDS value of less than 300mg/L. The actual lifespan of the filter may differ based on the product's usage location,
water quality, season, and amount of water used.
To replace the filter, follow these steps:
Step1 Disconnect the water source and remove the old filter.
1
Shut the three-way
2
Open the filter cover.
ball valve.
Step2 Install and turn on the water supply
Insert the new filter and tighten
1
2
Align the filter cover slot with the filter
it clockwise until it is secure.
handle and attach the filter cover.
Step 3 Flush the filter element
Follow the steps of "Before Using" in this manual to clean the filter element
*Note: The expiration of the filter's lifespan will not restrict the machine's filtering or water intake operations. However, to maintain the
quality of your drinking water, it is recommended to replace the filter promptly when prompted.
10
3
Refer to the direction guide and rotate
the filter element counterclockwise
until the filter element is rotated out.
3
Switch on the three-way
ball valve.
TROUBLESHOOTING
During use, the product may not operate normally for various reasons. Check the
following items and contact the after-sales service center if the issue persists.
Problem
Problem Reason
Pre-filter clogged
The system does not
filter element clogged
work after pressing the
water-making button
Water outlet clogged
Pre-filter clogged
filter element clogged
The sound of machine
water making is loud
and the water making
Pipeline clogged
time is significantly
increased
Low water temperature or freezing
What to do
Clean the Pre-filter
Replace the filter element
Check the clogged
Clean the Pre-filter
Replace the filter element
Check if there are foreign objects
blocking the water outlet
Turn off the water supply and temporarily
do not use the machine
11
Advertisement
Table of Contents
