Redlion Graphite GMUIN4 Installation Manual

Model GMUIN4 - Graphite® Universal
Installation Guide
U L
FOR USE IN HAZARDOUS LOCATIONS:
C C US US
R
Class I, Division 2, Groups A, B, C, and D
LISTED
T4
IND.CONT. EQ.
E302106
E317425
GENERAL DESCRIPTION
The model GMUIN4 is a 16-bit analog input module designed for
use with the Graphite products. The module provides 4 isolated
universal analog inputs as a means of signal measurement for data-
acquisition. The GMUIN4 accepts a wide range of thermocouples
and RTDs, as well as 0/4-20 mA and 0-10 V process signals. The
modules connect and communicate via proprietary USB connection
to the various Graphite devices. The Graphite devices, equipped
with serial ports as well as an Ethernet port(s), allows the system to
share data with PCs, PLCs, and SCADA systems. The maximum
number of modules varies for each Graphite device, see specific
models for details.
Once programmed, the module will continue to operate
independent of the Graphite device as long as power is applied.
Remove power from the host device before installing or replacing
any modules.
CONFIGURATION
The Graphite is configured with Windows
DIMENSIONS In inches (mm)
2.97 (76)
4.65
(118)
Input Module
® ®
compatible Crimson
1.25 (32)
1
z Dedicated 4 universal input module for the Graphite
products
z Accepts thermocouples, RTDs, 0/4-20 mA and 0-10 V signal
inputs
z Offers complete isolation; inputs, power and core
z Ideal for data-acquisition applications
software. The software is an easy to use, graphical interface which
provides a means of configuration and commissioning of new
systems, as well as routine module re-calibration.
SAFETY SUMMARY
All safety related regulations, local codes and instructions that
appear in this document or on equipment must be observed to
ensure personal safety and to prevent damage to either the
device or equipment connected to it.
Do not use these products to replace proper safety interlocking.
No software-based device (or any other solid-state device) should
ever be designed to be responsible for the maintenance of
personnel safety or consequential equipment not equipped with
safeguards. Red Lion disclaims any responsibility for damages,
either direct or consequential, that result from the use of this
equipment in a manner not specified.
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
WARNING - EXPLOSION HAZARD - Do not disconnect
equipment unless power has been switched off or area is
known to be non-hazardous.
WARNING - EXPLOSION HAZARD - Substitution of
components may impair suitability for Class I, Division 2
ORDERING INFORMATION
DESCRIPTION
Graphite Module, 4 Universal Inputs
A listing of the entire Graphite family of products and accessories
can be found at www.redlion.net.
Install - GMUIN4-K
Drawing No. LP0923
Revised 04/2023
II 3 G Ex nA IIC T4 Gc
-40°C≤T ≤75°C
AMB
DEMKO 14 ATEX 1387X
IECEx UL 15.0035X
UL22UKEX2574X
PART NUMBER
GMUIN400