Specifications - BorMann BCD4010 Manual

E N

SPECIFICATIONS

Technical Data
Model BCD4010
Voltage DC 20V
No load speed 8000rpm
Cutting width 300mm
Adjustable spacer guard and sub-handle, pivoting head from 0°
Features
to 90°, aluminum pipe adjusts from 1040mm to 1290mm
Includes 1x plastic wheel, 1x sub-handle
4
1. Handle
2. Safety lock
3. ON/OFF switch
4. Battery
5. Upper telescopic rod
6. Lock nut
7. Lower telescopic rod
8. Adjustment button
WWW.NIKOLAOUTOOLS.GR
9. Safety guard
10. Cutting head
11. Spacers
12. Motor
13. Additional handle
14. Charger cable
15. Guide wheel
16. Thread spool
* The manufacturer reserves the right to make minor changes to product design
and technical specifications without prior notice unless these changes significantly
affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other
models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all
repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product
with non-provided equipment may cause malfunctions or even serious injury
or death. The manufacturer and the importer shall not be liable for injuries and
damages resulting from the use of non-conforming equipment.