Table of Contents
Advertisement
Quick Links
20V MAX 5"
RANDOM ORBIT SANDER
BATTERY AND CHARGER SOLD SEPARATELY
READ ALL INSTRUCTIONS BEFORE FIRST USE.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
KEEP AWAY FROM CHILDREN.
Maximum initial battery voltage (measured without a load)
JD510720
is 20 volts. Nominal voltage is 18 volts.
WEAR CSA APPROVED
EYE PROTECTION
5 Year Limited Warranty on tool
WEAR EAR
PROTECTION
WEAR A
FACE MASK
Advertisement
Table of Contents
Related Manuals for Benchmark 1262-001
Summary of Contents for Benchmark 1262-001
- Page 1 20V MAX 5" RANDOM ORBIT SANDER 5 Year Limited Warranty on tool BATTERY AND CHARGER SOLD SEPARATELY READ ALL INSTRUCTIONS BEFORE FIRST USE. KEEP THIS MANUAL FOR FUTURE REFERENCE. KEEP AWAY FROM CHILDREN. Maximum initial battery voltage (measured without a load) JD510720 is 20 volts.
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS 20V MAX 5" RANDOM ORBIT SANDER Voltage 3/32” Orbit Speed (3mm) VS 6,000-12,000 OPM Sanding Sheet 5" (127mm) Sanding Paper Attachment Hook & Loop Tool Weight (without battery) 3.75lbs. (1.7kg) Batteries (Sold Separately) 5350-023 (2.5Ah) 5350-011 (4Ah) 5350-012 (5Ah) Charger (Sold Separately) 5350-010 2.4Amp 5350-022 6A Fast Charger... -
Page 3: Table Of Contents
1262-001 20V MAX 5" RANDOM ORBIT SANDER TABLE OF CONTENTS Product Specifications ................... 1 Table of Contents ................... 2 General Safety Warnings ................3 Eye, Ear & Lung Protection ................3 General Safety Rules ..................4 Power Tool Use and Care ................5 Service ...................... -
Page 4: General Safety Warnings
GENERAL SAFETY WARNINGS WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. It must be understood that common sense and caution are factors which cannot be built into the product. -
Page 5: General Safety Rules
1262-001 20V MAX 5" RANDOM ORBIT SANDER GENERAL SAFETY RULES WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. -
Page 6: Power Tool Use And Care
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. -
Page 7: Service
1262-001 20V MAX 5" RANDOM ORBIT SANDER 4. Fluids may leak out of rechargeable battery units if they are misused. If this with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns. - Page 8 To avoid injury from accidental starting, always remove the plug from the power source before installing or removing dust box. Do not rest your hands next to or in front of the sander and the area being worked as there is a risk of injury if you slip. RISK OF FIRE DUE TO FLYING SPARKS! Sanding metal causes sparks to be produced.
-
Page 9: Symbols
1262-001 20V MAX 5" RANDOM ORBIT SANDER SYMBOLS WARNING: Some of the following symbols may appear on the random orbit sander. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow Three-phase alternating Volts current with neutral... -
Page 10: Know Your 5" Radom Orbit Sander
KNOW YOUR ORBIT SANDER Speed Adjustment Dial ON/OFF Switch Battery (Sold Separately) Insert here Dust bag Sanding Base 3 Sanding discs included 80g, 120g & 240g... -
Page 11: Assembly
1262-001 20V MAX 5" RANDOM ORBIT SANDER ASSEMBLY INSTALLING THE DUST BAG ASSEMBLY WARNING: Remove battery before assembly. (1) Slide the dust bag into the back of the tool as far it will go (Fig. 1). NOTE: Remove and clean the dust bag assembly often to remove accumulated dust from the dust bag. -
Page 12: Operating
OPERATING ON/OFF SWITCH To turn the sander ON, ensure battery is charged and inserted into the back of position. (Fig. 2) Fig 2 SPEED ADJUSTMENT Your orbital sander is equipped with a speed setting wheel. To set speed, turn speed wheel to desired speed setting. - Page 13 1262-001 20V MAX 5" RANDOM ORBIT SANDER WARNING: For safety reasons, the operator must read the sections of this Owner’s Manual entitled “GENERAL SAFETY WARNINGS”, “POWER TOOL SAFETY”, “SPECIFIC SAFETY RULES”, “EXTENSION CORD SAFETY” and “SYMBOLS” before using this cut-out tool.
-
Page 14: Maintenance
MAINTENANCE GENERAL WARNING: When servicing, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. -
Page 15: Exploded View
1262-001 20V MAX 5" RANDOM ORBIT SANDER EXPLODED VIEW... -
Page 16: Parts Listing
PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the sander . Any attempt to repair or replace electrical parts on this sander may create a safety hazard unless repairs are performed by a qualified technician. -
Page 17: Warranty
WARRANTY BENCHMARK RANDOM ORBIT SANDER If this Benchmark Tool fails due to a defect in material or workmanship within 5 years from the date of purchase, return it to any Home Hardware store with the warranty does not include expendable parts including but not limited to blades, brushes, belts, light bulbs. - Page 19 1262-001 20V MAX 5" RANDOM ORBIT SANDER...
- Page 20 20V MAX 5" RANDOM ORBIT SANDER 5 Year Limited Warranty on tool BATTERY AND CHARGER SOLD SEPARATELY 1262-001 BENCHMARK TOOLS CANADA Made in China ST. JACOBS, ONTARIO N0B 2N0 © 01 / 2021 Home Hardware Stores Limited CUSTOMER SERVICE/TECH SUPPORT...
Need help?
Do you have a question about the 1262-001 and is the answer not in the manual?
Questions and answers