Step 2: Subframe Installation - Sears CRAFTSMAN C 151 61680 3 Owner's Manual

STEP 2
SUBFRAME INSTALLATION:
You must choose which brace pin (item 1 or item 4)
that is appropriate for your tractor model.
Tractors with a clutch that measures 5.5"
high only (as shown):
You must use brace pin (item 1) and install it in the
bottom holes of the right support (item 2) with two
carriage bolts 3/8'' x 1'' (item 3;heads outside) and
two 3/8" flange nuts.
Tighten firmly.
NOTE: This brace pin must be under the lawnmower
belt.
The belt must not touch the brace pin.
For other tractors:
Use brace pin (item 4) and follow the
installation instructions below.
Install the brace pin (item 4) on the right support (item
2) with two carriage bolts 3/8'' x 1'' (item 3;heads
outside) and two 3/8" flange nuts.
Tighten firmly.
NOTE: Generally, the brace pin must be over the
lawnmower belt and at the same time, as low as
possible.
No interference is allowed.
See chart.
Tractor Hole
(inside view of item 2)
2006 and Bottom
2007
(most)
VGT Bottom
frame
Others Top
ASSEMBLY
Position of
brace pin
Upwards
Downwards
Upwards
or
downwards
7
Install brace pin