THOR200 User’s Manual Revision Date: July. 05. 2017 Safety Information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
THOR200 User’s Manual Revision Date: July. 05. 2017 Chapter 1: Product Introduction 1-1 Key Features System Low Power Processor Intel® Broadwell-U Core™ i7-5650U Processor (4M Cache, up to 3.20 GHz) Turbo Boost Technology 2.0 , VPro and Hyper-Threading support. Memory type...
Page 7
THOR200 User’s Manual Revision Date: July. 05. 2017 DC-IN 4-Pin S-code Male M12 Connector (Amphenol M12S-04PMMS-SF8001) Power Requirement Power Input 9V to 36V DC-in Power Type AT/ATX Mode Select by Jumper Applications, Operating System Applications Commercial and Military Platforms Requiring Compliance to MIL-STD-810G...
Page 8
THOR200 User’s Manual Revision Date: July. 05. 2017 Green Product RoHS, WEEE compliance Environmental Operating Temp -40 to 70°C (ambient with air flow) Storage Temp. -40 to 85°C Relative Humidity 5% to 95%, non-condensing. *Specifications are subject to change without notice*...
THOR200 User’s Manual Revision Date: July. 05. 2017 Chapter 2: Jumpers and Connectors This chapter describes the jumpers and connectors on the systems’ motherboard. 2.1 Front Panel Connector Pin Definitions...
THOR200 User’s Manual Revision Date: July. 05. 2017 Chapter 3: AMI BIOS UTILITY This chapter provides users with detailed descriptions on how to set up a basic system configuration through the AMI BIOS setup utility. Starting To enter the setup screens, perform the following steps: ...
THOR200 User’s Manual Revision Date: July. 05. 2017 Main Menu The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.
THOR200 User’s Manual Revision Date: July. 05. 2017 3.4 Advanced Menu The Advanced Menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference.
THOR200 User’s Manual Revision Date: July. 05. 2017 3.6 Security Menu Administrator Password Set administrator password. User Password Set user Password.
Need help?
Do you have a question about the THOR200 and is the answer not in the manual?
Questions and answers