Page 2
SCH400-AA User’s Manual Revision Date: July.7.2021 Safety Information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
Page 3
First release Packing List Q’ty Item Description SCH400-AA IEC-61850-3, IEEE-1613 Substation 2U Computer Driver CD Ordering information SCH400-AA IEC-61850-3, IEEE-1613 Substation 2U Computer with Intel 10th Gen Xeon® W-1200 or Core™ i9/i7/i5 Processor 2 × RJ45 GbE, 1 x IPMI, 9~36V DC-IN, TPM support / FTDI By option , 2 x 150W...
Page 4
In order to meet the RoHS compliant directives, 7Starlake has established an engineering and manufacturing task force to implement the introduction of green products. The task force will ensure that we follow the standard 7Starlake development procedure and that all the new RoHS components and new manufacturing processes maintain the highest industry quality levels for which 7Starlake are renowned.
SCH400-AA User’s Manual Revision Date: July.7.2021 Chapter 1 : Production Introduction 1.1 Specifications System 10th Generation Intel® Xeon® W-1200 Processors Intel® Xeon® W-1290TE Processor (20M Cache, up to 4.50 GHz) Intel® Xeon® W-1250TE Processor (12M Cache, up to 3.80 GHz) 10th Generation Intel®...
Page 7
SCH400-AA User’s Manual Revision Date: July.7.2021 FTDI 1 (By option) OS support list Windows Windows 10 x64 Linux Ubuntu, Red Hat Mechanical and Evvironmental Dimension 430 x 450 x 88 mm ( W x D x H ) Operating Temp.
SCH400-AA User’s Manual Revision Date: July.7.2021 Chapter 2 : Rear I/O Ports 2.1 LAN/IPMI port 2.2 VGA/DVI-D/DP port A VGA port and a DVI-D port are located next to DisplayPorts 1/2 on the I/O back panel. Use these connections for VGA and DVI displays. The VGA connector is on top and the DVI-D is on the bottom.
SCH400-AA User’s Manual Revision Date: July.7.2021 Chapter 3 : System Setup 3.1 Removing the Top Cover from the Chassis The sixteen screws on the top and side are used to secure the cover to the chassis. Remove these screws and put them in a safe place for later use 3.2 Installing PCIe Card...
SCH400-AA User’s Manual Revision Date: July.7.2021 3.4 2.5” Easy Swap SSD installation SCH400-AA support four 2.5” Easy Swap SSD • Use Tri-angle security key to open keylock and pull out the 2.5”SSD tray. • Put 2.5”SSD on the tray and make sure SSD is fixed and push the tray back.
SCH400-AA User’s Manual Revision Date: July.7.2021 4.1 Starting To enter the setup screens, perform the following steps: • Turn on the computer and press the <Del> key immediately. • After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can be accessed from the main BIOS setup menu, such as the Chipset and Power menus.
Page 15
SCH400-AA User’s Manual Revision Date: July.7.2021 The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message.
Page 16
SCH400-AA User’s Manual Revision Date: July.7.2021 fields. The time setting is entered in HH:MM:SS format. Note: The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00. BIOS Version This item displays the version of the BIOS ROM used in the system.