Automation - ElectiQ VSTR9-650-0.6WW User Manual

AUTOMATION

Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a range
of other influences, depending what other TUYA enabled devices you have on the network.
1. Press on the Scene tab at
the bottom of the Home
screen
4. Setup is very similar to the scene setup on the previous page, and
includes an extra section for specifying a trigger for the scene to start.
Press the Pen next to "Please Enter Scene Name" to input the name
for your Scene
Press the Red Plus next to "When any condition is satisfied" to add the
trigger
Press the Red Plus next to "Execute following actions" to add the
action required. Then select the heater from the list of devices.
6. Chose the function,
set the value for the
function, and then press
the back button in the
top right corner, to
return to the previous
screen.
2. Press on the Automation
tab at the top of the screen.
7.
Once all the functions required have been
added, press the Save button in the top right
corner to finalize and save your new scene.
The automation is now set up, it can be turned on
and off using the toggle on the home page.
Page 19 of 22
3. Press on the + at the top of
the screen or press on Add
Automatic Action
5. Select the condition when the
automation should start. A
number of triggers can be
combined.