Philips HD2004 User Manual page 6

For U.K. only:
This appliance is supplied with a non-rewirable
13 Amp. plug. The plug must never be used
without the fuse cover being in place.
If a replacement fuse cover is required, it must be
of the same type or colour as the coloured insert
around the fuse cover.
Replacement fuse covers are available from
Electrical Retailers or direct from Philips,
tel. 0181 689 2166, ext. 8014.
Replacement 13 Amp. fuses must be BSI or
ASTA BS 1362 approved.
Important safety information
If the non-rewirable plug is not suitable for the
socket outlets in your home, it can be removed
and replaced by a plug of the correct type.
The non-rewirable plug must be cut from the
mains cord, the fuse removed, and the plug safely
discarded to prevent further use.
The removed plug can be hazardous if inserted
into a live mains socket.
Fitting a plug
Connections - Applicable to U.K. only
WARNING - THIS APPLIANCE MUST
BE EARTHED
The wires in this mains lead are coloured in
accordance with the following code:
GREEN AND YELLOW - EARTH
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead
of this appliance may not correspond with the
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured GREEN AND
YELLOW must be connected to the terminal
which is marked with the letter "E" or by the
earth symbol E or coloured GREEN or
GREEN AND YELLOW.
The wire which is coloured BLUE must be
connected to the terminal which is marked
with a letter "N" or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter "L" or coloured RED.
Note: If the terminals of the plug are
unmarked or if you are in any doubt,
consult a qualified electrician.
If a 13 Amp. 3-pin plug is fitted, it must be an
ASTA approved plug, conforming to BS 1363-
1986.
If a (BS 1363) 13 Amp. plug is used, this must
be fitted with a 13 Amp. fuse.
8
Important